Category: Blogs

Table of Contents

1. The Beginning of Smarter RF Shielding Methods
2. Why Flexible RF Shielding Matters Today
3. What Curtain Technology Is and Why It Matters
4. How Orbis Systems Is Innovating With Curtain-Based RF Shielding
5. Real-World Use Cases for RF Curtain Systems
6. How to Choose Between Curtains, Boxes, and Chambers
7. How Curtain Technology Supports Future Testing
8. Frequently Asked Questions

Key Takeaways

• RF isolation systems are essential as the interference risk grows with wireless expansion.
• Curtain RF shielding is flexible and cost-effective for semi-isolated and prototype testing, though it provides lower isolation than a fully shielded modular chamber.
• Orbis Systems enhances this concept by combining it with their proven RF shielded enclosures.
• EMI shielding solutions support multi-device testing and reduce errors.
• Hybrid systems let labs balance precision and flexibility.
• Curtain shielding is suitable for functional testing and large setups, but not ideal for high-isolation OTA, mmWave FR2, or certification testing.
• Choosing between a curtain, a box, or a chamber depends on the performance budget and space.

The Beginning of Smarter RF Shielding Methods

Testing wireless devices is getting tougher every year because engineers now need more innovative ways to control RF interference than ever before.

As wireless technology becomes more complex, the demand for accurate and interference-free testing continues to rise. This shift has made RF isolation systems an essential part of modern testing environments. Labs, production lines, and R&D facilities now rely on advanced shielding methods that allow flexible setups, fast reconfiguration, and stable measurement conditions.

Orbis Systems is expanding its approach to RF shielding by introducing curtain-based technology that supports both flexibility and precision. This approach supports flexible test zones and good functional isolation, though it does not match the high precision or isolation levels of rigid chambers used for certification or high-frequency testing.

Why Flexible RF Shielding Matters Today

As wireless devices advance, test environments must keep up with growing complexity. Higher frequency bands, multi-antenna systems, and dense device ecosystems require reliable shielding to prevent interference and preserve test accuracy.

Flexible RF shielding matters because modern labs face challenges such as limited space, growing test requirements, and faster product cycles. They also need systems that can adapt quickly without costly rebuilds.

Why flexibility is important

• The number of wireless devices in test labs continues to grow
• Engineers need a quick setup and reconfiguration
• Fixed chambers are sometimes too large or too costly
• Production lines need fast and repeatable testing

Flexible shielding also supports environments that must change frequently, such as mixed-product lines or labs that test different wireless standards.

Benefits of flexible shielding

• Faster deployment of temporary or semi-permanent test areas
• Better use of limited space
• Lower cost compared with building large, rigid chambers
• Improved efficiency for multi-device testing

What is Curtain Technology and Why It Matters?

Curtain-style shielding is an adjustable enclosure made from conductive fabric or panel materials that block external RF signals. It creates a defined test area without the need for a full rigid chamber. This makes it useful for labs that need mobility, scalability, or temporary shielding on demand.

Curtains offer a good balance between isolation performance and practical deployment. They work well for early-stage R&D and functional RF testing, especially for sub-6 GHz applications, but they are not suited for high-precision mmWave, EMC compliance, or certification-level measurements.

RF Protection Enclosures and Curtain Comparison

This comparison helps clarify where curtain shielding fits in the overall range of options.

Curtains provide a firm middle ground when labs need shielding but cannot commit to permanent setups.

How Orbis Systems Is Innovating With Curtain-Based RF Shielding

Orbis Systems is known for producing reliable RF shielded enclosures and functional test systems built for wireless and communication testing. Their RF shielded boxes provide strong electromagnetic isolation for wireless devices in both R&D and practical testing environments.

By applying their knowledge of shielding and automation, Orbis is developing flexible curtain-based solutions that work well in laboratories and production settings.

RF Shielded Enclosures Working With Curtain Zones

Hybrid setups allow engineers to combine high-isolation rigid boxes with flexible curtains for multi-stage testing. This gives accuracy where it matters and flexibility where speed is essential.

EMI Shielding Solutions for Multi-DUT Environments

EMI shielding solutions play an important role when multiple devices are tested at the same time. Curtain systems are practical for functional testing, high-throughput setups, and mixed testing environments where flexibility is needed. However, they are not suitable for mmWave FR2 or certification-level testing, as those applications require high-isolation RF chambers to ensure precision and compliance.

Modular Components and RF Isolation Accessories

Orbis supports a wide ecosystem of modular accessories, including interface panels for RF, AC, USB, and Ethernet connections. Their systems are known for easy integration with automated test equipment and shielding enhancements.

Expert insight

Modern RF shielding needs to be modular and support high-density testing. Curtain systems are helpful for functional testing, pre-validation, production zoning, and isolating large DUTs. Still, they cannot replace high-isolation chambers required for mmWave 5G FR2, precision antenna testing, or regulatory compliance.

Call to action

Unlock cleaner and more accurate testing with flexible shielding that grows with your needs. Connect with Orbis to explore your options.

Real-World Use Cases for RF Curtain Systems

Curtain-based shielding is used in several industries that deal with wireless devices, sensors, and communication technology.

5G OTA Testing

Orbis Systems also offers full OTA chambers for high-precision testing, and curtain setups can be used alongside them to add flexibility in the testing layout.

Automotive V2X and Infotainment

Vehicles now rely on wireless communication for safety and entertainment. Curtain systems allow fast setup changes for different modules without needing a new chamber for each project.

IoT and Consumer Device Production

High-volume manufacturing involves testing many units at once. Curtain shielding helps isolate each test area while keeping the line moving smoothly.

Bullet points showing solved challenges:

• Reducing unexpected interference from nearby test stations
• Allowing layout changes without facility rebuilds
• Supporting different device sizes and shapes
• Helping teams scale production-ready test setups

Improve your workflow and save engineering hours by using flexible shielding setups designed around your process.

How to Choose Between Curtains, Boxes, and Chambers

Choosing the right shielding approach depends on isolation requirements, device types, and testing frequency.

Factors to consider

• Required isolation level for your application
• Frequency range and standards being tested
• Throughput and number of devices
• Space limitations and mobility
• Integration with automation systems

Cost and performance considerations

• Curtains cost less but may not suit certification-grade testing
• Boxes provide high isolation for repeatable measurements
• Chambers are ideal for advanced OTA and detailed R&D
• Hybrid setups combine the strengths of all three options

Wireless technologies continue to expand in complexity, and this creates a growing need for reliable shielding that supports accurate testing. Today’s labs and production facilities require RF isolation systems that keep up with evolving standards and workflows.

Orbis Systems brings deep experience in test system design and RF protection enclosures, making it well-positioned to offer innovative shielding setups. By combining rigid enclosures with flexible curtain zones and strong EMI shielding solutions, Orbis provides a complete and scalable way to manage interference in modern test environments.

If you are ready to improve your testing process, explore Orbis Systems’ advanced shielding options and discover how flexible solutions can enhance your workflow.

Frequently Asked Questions

What is an RF shielding curtain?

It is a fabric or panel-based enclosure that blocks external RF signals and forms a controlled test zone.

Where are RF isolation systems used?

They are used in R&D labs, wireless test centres, production QA lines, automotive labs, and IoT device manufacturing.

Can RF shielding help reduce interference from 5G devices?

Yes, RF shielding helps reduce interference from 5G devices.

It works well for sub-6 GHz and general testing, but mmWave/FR2 testing requires high-performance rigid chambers for full isolation.

How do I choose the right EMI shielding solution?

You should consider isolation level, device type, frequency band, space, throughput, and automation needs.

Table of Contents

1. Understanding the Next Generation of Wireless Connectivity
2. mmWave Testing – The Heart of Next-Gen Wireless
3. Bridging the Gap Between R&D and Production
4. Preparing Your Lab for 6G – A Simple Roadmap
5. Seize the Future of Connectivity – Build Your 6G Edge Now
6. FAQs
7. Key Takeaways
8. References

Wireless tech isn’t just getting faster anymore. It’s getting smarter too.
Right now, we’re watching the jump from 5G to 6G happen, and honestly? It’s bringing some tough challenges for anyone working in engineering or testing.

Key Takeaways

• 6G research is targeting frequencies between 100 GHz and 1 THz, commonly called the sub-THz and THz bands
• mmWave testing is what makes reliable next-gen connectivity possible
• Testing setups need to be modular, automated, and easy to scale
• Getting ready early saves you time, money, and hassle later
• Working with a trusted expert like Orbis Systems makes the whole journey from R&D to production smoother

If you’re involved in 6G systems, you already know that mmWave testing matters a lot. Without it, you can’t be sure your connections will actually work when people need them.

So let’s break down what’s happening with wireless technology, why mmWave testing is such a big deal, and how you can get your testing setup ready for what’s coming.

What’s Actually Changing in Wireless Connectivity

Look, 6G isn’t that far off anymore. Networks are getting smarter and faster, sure. But more importantly, they’re connecting everything in ways we haven’t seen before.

So What Exactly Is 6G?

Think of 6G as wireless on steroids. We’re talking about Peak data rates that are expected to exceed 1 Tbps (terabit per second), and millions of devices talking to each other without breaking a sweat. To pull this off, 6G will use really high frequencies (terahertz waves), better antennas, and AI that helps make decisions on the fly.

Here’s the thing, though. Your testing setup needs to keep up. You’ll be dealing with complicated antennas, super-fast signals, and way more demanding checks than before.

Moving From 5G to 6G

This shift is vast when it comes to frequencies. 5G mostly stays under 40 GHz. But 6G? It’s going way past 100 GHz. That means you need different tools, different methods, and way better accuracy.

Your testing systems need to do more than just work. They need to grow with you, run automatically, and adapt when you need to test new frequency ranges.

Why Getting Ready Early Actually Matters

When you prepare for 6G now instead of later, you get some real benefits:

• Your development moves faster
• You get results you can actually trust and repeat
• Scaling up your testing becomes way easier

Bottom line? Your testing system today should already handle what’s coming tomorrow.

Why mmWave Testing Is So Important

mmWave testing is how you check if high-frequency devices actually work in 5G and 6G networks. Engineers use it to make sure antennas, modems, and devices can handle these fast signals when real people use them.

Testing at mmWave frequencies is exact work. Even small misalignments or changes in the room can mess up your results. Positioning accuracy below 0.1° and 1 mm becomes critical. That’s why automation and tight control matter so much.

Frequency Focus & 6G Readiness Plan

This table shows you exactly how different frequencies and testing stages match up with your 6G plan.

Getting From Research to Actually Making Stuff

Once you finish research, the next challenge is scaling everything up for production. Your systems need to move smoothly from testing prototypes to testing thousands of units.

Testing Early Designs

At first, you’re focused on antenna design, how well frequencies perform, and device accuracy. Using modular and compact OTA chambers lets you run the same tests over and over without wasting time on setup.

Certification and Making Sure Everything Works Together

Before devices reach the market, they must follow ITU and 3GPP standards. With automated validation, you can test devices faster, improve accuracy, and maintain complete records for every test..

Scaling Up When You’re Ready to Produce

When you hit the production stage, automation becomes your best tool. It lets you run multiple tests at once without needing someone to babysit every step.

You’ll see these benefits:

• Tests finish faster
• Results stay consistent
• Maintenance gets easier

Real Example: This aligns with Orbis Systems’ modular OTA automation projects in mmWave validation

One device maker worked with Orbis Systems to upgrade their lab. They swapped out manual setups for automated, modular OTA systems. The payoff? Testing time dropped by 50%, and they doubled their productivity. That’s what happens when you scale the right way.

How to Get Your Lab Ready for 6G

You don’t need to tear everything down and start over. You just need systems that can adapt and grow.

What Actually Works for Future-Ready Testing

• Mix Sub-6 and mmWave testing in one place
• Automate the tedious, repetitive tasks and data collection
• Buy modular test setups that you can expand later
• Create real-world conditions using OTA environments
• Work with testing providers who actually know next-gen wireless (like Orbis Systems)

Don’t Wait Too Long

Start building your 6G-ready setup now. Being ahead of the curve means your lab stays useful, runs efficiently, and you’re ready when standards change.

Take Action: Build Your 6G Advantage Today

The shift from 5G to 6G is going to change how we connect, test, and talk to each other.

When you use mmWave testing, modular systems, and automation, you can make your lab ready for the future, spend less time testing, and stay ahead of everyone else.

Orbis Systems helps with this whole process. They offer smart OTA chambers, antenna positioning systems, and flexible automation tools that work with what you need.

Contact Orbis Systems today and talk about making your testing environment 6G-ready.

FAQs

1. What is a 6G communication system?

It’s the next wireless technology that will give us super-fast, smart, and energy-efficient connections.

2. Why is mmWave testing important?

Because mmWave frequencies let you transfer data at high speeds. Testing makes sure devices can actually handle those speeds correctly and reliably.

3. What makes 5G to 6G testing challenging?

Higher frequencies, tighter accuracy requirements, and more complicated antennas mean you need better testing setups.

4. How does automation help with 6G testing?

Automation cuts down setup time, makes results more accurate, and lets you control test processes from anywhere.

5. How can I prepare my lab for 6G?

Upgrade to modular, automated systems that handle both 5G and 6G frequencies. Also, partner with someone who knows what they’re doing.

On October 30, 2025, our Orbis Systems China team came together for the All Hands Meeting and Awards Ceremony. It was a day when everyone could step away from daily tasks for a moment and look at the bigger picture of what we achieve together. The day carried a warm and respectful atmosphere. It gave us time to appreciate our efforts, learn from each other, and feel proud of the progress we have made as a team.

We would like to sincerely thank Mr Eero and the China management team for attending and taking an active role in the meeting. Their presence showed support, trust, and shared direction. It reminded us that every part of Orbis Systems, whether in China or other regions, moves together with the same goals and values.

This gathering was not just about giving out awards. It was also a moment to talk openly, understand our current direction, and encourage one another. It helped us recognize how our individual roles connect to the larger picture of company success. When we sit together like this, we can clearly see how everyone contributes, whether through customer support, technical work, assembly, planning, engineering, or coordination.

Recognizing Our Team Members

This year, three team members received special recognition. These awards were not based on big presentations or spotlight moments. They were based on daily work, steady commitment, and the way each person supports others. Their efforts show what teamwork and dedication look like in real practice.

Best Customer Support Award- Heath Zhang

The Best Customer Support Award was presented to Heath Zhang.
Heath has been a strong support for our customers, especially when they need help with system questions, system setup, troubleshooting, or ongoing service needs. He approaches each situation calmly and clearly, making sure the customer feels guided and understood.

Customer support is not just about giving answers. It is about listening, understanding the concern, and showing responsibility. Heath does this consistently. Because of his patience and care, customers feel confident that they can rely on us. His work directly helps us maintain trust and long-lasting customer relationships. This award is a reflection of the effort he puts in quietly every day.

Outstanding Award for Fixture Assembly Management- Master Chan

The Outstanding Award for Fixture Assembly Management was given to Master Chan.
His work focuses on fixture assembly, which is a very important part of our test system quality. Accuracy in assembly affects system performance, reliability, and testing results. This is not work that allows shortcuts. It requires experience, attention, and steady hands.

Throughout the year, Master Chan has shown strong technical understanding and a careful approach. He also supports and guides team members when needed, ensuring work is done correctly and safely. His efforts help us deliver testing solutions that perform well and last reliably in use. His leadership comes from skill and responsibility rather than big words, and this award acknowledges that.

Excellent Employee Award- Lezhong Wang

The Excellent Employee Award was presented to Lezhong Wang.
Lezhong is someone who contributes consistently. He completes tasks with care, supports his team, and maintains a positive and dependable work attitude. Even when work becomes busy or challenging, he continues to focus and move forward steadily.

Every team has people who help keep things running smoothly, even if their role is not always in the spotlight. Lezhong is one of those people. His reliability and cooperation help everyone work better together. This award recognizes that steady strength.

Leadership Sharing and Future Direction

During the meeting, Eero and the China management team shared updates about our projects, current progress, and plans for the road ahead. They spoke about improving collaboration, focusing on quality in every step of delivery, and continuing to support our customers with care and precision.

The message was clear:
When we communicate openly, support each other, and stay aligned on goals, we move forward stronger.
Our work does not depend on one person alone. It depends on how we work together, learn from each other, and take responsibility.

Looking Ahead Together

We also took a moment to look at the photos from the day. The smiles, the handshake moments, and the shared conversations captured the real spirit of our team. Not forced. Not formal. Just a genuine connection.

This ceremony reminds us that progress is built step by step.
It comes from the work we do daily, often quietly, often without a spotlight.

Every person in our team matters.
Every effort contributes to something bigger.

As we move ahead, let us keep supporting each other, communicating clearly, and working with patience and respect.

Thank you to everyone for your dedication and teamwork.
We look forward to continuing this journey as one Orbis family.

Table of Contents

1. Understanding the shift from 5G to 6G
2. Evolution of Wireless Systems: From 5G to Early 6G Capabilities
3. Importance of 5g Frequency Testing in Network Advancement
4. Role of OTA Chambers and Antenna Positioning in 5 G Frequency Testing
5. Automation and Data Accuracy in Next-Gen Wireless Testing
6. Transition from Lab Validation to Real-World Deployment
7. Accelerating 6G Readiness Through Advanced Testing
8. Frequently Asked Questions

The evolution from 5G to 6G marks a shift from high-speed connectivity to intelligent, ultra-low-latency communication. 5.5G, or 5G-Advanced, enhances bandwidth, reduces latency, and introduces AI-driven network optimization, paving the way for 6G.

Reliable frequency testing is essential to validate multi-band and high-frequency networks.

Orbis Systems delivers advanced OTA chambers and antenna positioners for accurate sub-6 GHz and mm Wave testing. With automated test environments and precise data logging, Orbis systems helps engineers accelerate development, improve test reliability, and prepare for the next generation of wireless innovation.

Understanding the shift from 5G to 6G

As wireless technology continues to evolve, the transition from 5G to 6G represents more than just faster data speeds—it’s about creating smarter, more responsive, and interconnected networks.

Orbis Systems is leading this evolution by providing next-generation test and measurement solutions designed to bridge the gap between today’s 5G performance and tomorrow’s 6G innovation.

With deep expertise in RF and OTA validation, Orbis Systems enables manufacturers, network operators, and research institutions to test new 5G and emerging 6G technologies with exceptional accuracy, consistency, and automation.

Our scalable, future-ready testing platforms ensure that your wireless innovations not only meet today’s standards but are fully prepared for the demands of the next generation of connectivity.

Evolution of Wireless Systems: From 5G to Early 6G Capabilities

The transition from 5G to 6G introduces new challenges in spectrum utilization, signal quality, and network synchronization. 5.5G (also known as 5G-Advanced) serves as a crucial bridge between the two generations, incorporating enhanced radio capabilities, improved energy efficiency, and AI-driven network optimization.

To keep pace, test systems must evolve to accurately measure parameters such as spectral efficiency, beamforming precision, latency control, and multi-band performance.

Orbis Systems addresses these challenges with next-generation wireless test solutions designed to emulate real-world propagation environments and complex mobile conditions—enabling reliable validation of advanced 5G and pre-6G technologies.

Importance of 5g Frequency Testing in Network Advancement

5G frequency testing ensures that all network components perform consistently across different frequency bands from sub-6 GHz to mm Wave. Test systems must accurately evaluate key performance metrics such as data throughput, modulation accuracy (EVM), signal-to-noise ratio (SNR), and latency.

Orbis Systems provides advanced RF test and measurement solutions within controlled environments to validate antenna design, beam steering, and link quality across a wide frequency range. Their equipment meets the stringent performance and repeatability requirements of 5G-Advanced (5.5G) and is scalable for early 6G frequency ranges, ensuring reliable and verifiable test data.

Role of OTA Chambers and Antenna Positioning in 5 G Frequency Testing

Over-the-air (OTA) testing is critical for evaluating how wireless devices perform under real-world propagation conditions. Orbis Systems’ precision-engineered OTA chambers allow comprehensive validation of antenna patterns, beamforming accuracy, and handover performance across multiple environments.

Additionally, Orbis systems develop high-precision antenna positioning systems that support both sub-6 GHz and mm Wave testing. These systems enable engineers to measure radiation patterns and beam management behaviour in realistic angular and spatial configurations — an essential capability for testing 5.5G and pre-6G systems.

Automation and Data Accuracy in Next-Gen Wireless Testing

Next-generation wireless testing demands automation, precise data acquisition, and system-level analytics. Orbis Systems integrates automation frameworks and test orchestration tools to execute complex test sequences repeatedly and consistently. Automated workflows monitor multiple performance metrics simultaneously, such as latency, error vector magnitude (EVM), throughput, and synchronization stability.

Accurate data logging and analytics enable engineers to assess long-term system behavior and identify factors affecting network stability and performance. This data-driven approach enhances 5G-Advanced (5.5G) and early 6G prototype validation, allowing continuous improvement and faster test cycles.

Transition from Lab Validation to Real-World Deployment

Transitioning from laboratory testing to real-world deployment requires test environments that closely replicate live network conditions. Orbis Systems’ scalable and modular OTA (Over-the-Air) solutions bridge this gap by enabling engineers to move seamlessly from controlled lab setups to field-level network trials.

Their closed-loop testing methodology allows real-time adjustments based on test outcomes, significantly accelerating the time-to-market for new wireless technologies.

Orbis systems ensure compliance with 3GPP standards and alignment with emerging 6G architectural frameworks, making its systems ideal for network operators, equipment manufacturers, and research institutions preparing for large-scale 6G deployment.

When testing 5.5G and early 6G technologies, critical performance validation areas include multi-band OTA testing, automated frequency calibration, and precise beamforming simulation — all which Orbis Systems supports through its advanced testing ecosystem.

Accelerating 6G Readiness Through Advanced Testing

The shift from 5G to 5.5G marks more than just speed improvements — it introduces greater network intelligence, adaptability, and energy efficiency. Orbis Systems enables this evolution through cutting-edge wireless testing platforms, OTA chambers, and automation tools that ensure 5G infrastructure remains future-ready for 6G performance validation.

If your organization is preparing to enhance its 5G-Advanced or pre-6G testing capabilities, contact Orbis Systems today to explore innovative solutions that help you optimize performance, accelerate validation, and stay ahead in next-generation wireless innovation.

Frequently Asked Questions

1. What is the most important thing that sets 5G apart from 6G?

6G will deliver ultra-low latency, higher data rates, and AI-driven network management, enabling intelligent, adaptive, and energy-efficient communication. 5.5G (also called 5G-Advanced) serves as an evolutionary bridge between 5G and 6G, introducing more efficient spectrum use, enhanced radio access technologies, and integrated intelligence across the network.

2. What is 5.5G, and why is it important?

5.5G (5G-Advanced) is an enhanced version of 5G that integrates AI-powered optimization, improved massive MIMO, network energy efficiency, and better spectrum utilization. It prepares current 5G infrastructure for future 6G applications by improving performance, reliability, and automation.

3. Why is it essential to test 5 G frequencies for networks of the next generation?

5G frequency testing evaluates network performance across different spectrum bands—from sub-6 GHz to mm Wave—to ensure consistent, reliable communication under varying conditions. It helps verify signal quality, latency, and throughput both in laboratory environments and real-world field testing.

4. What do OTA chambers do for wireless testing?

Over-the-Air (OTA) chambers simulate real-world radio propagation environments, allowing engineers to measure antenna performance, beamforming accuracy, and overall device reliability without interference. They are essential for validating 5G, 5.5G, and emerging 6G systems across multiple frequency bands.

5. What does Orbis Systems do to help get ready for 6G?

Orbis Systems develops advanced test environments, OTA chambers, antenna positioners, and automation solutions that enable engineers to evaluate 5G-Advanced and pre-6G technologies. These systems help organizations validate new features, optimize performance, and accelerate readiness for the next generation of wireless communication.

Table of Contents

1. A Smarter Way to Simplify Industrial Operations
2. The Changing Landscape of RF Testing
3. Orbis Systems’ Advanced Approach to RF Shield Box Design
4. Seamless Integration with Automated Test Systems
5. Portable and Scalable Shield Box Configurations
6. Frequently Asked Questions (FAQs)
7. Conclusion and Call to Action

By utilizing advanced, modular shield boxes with high scalability, automation and isolation, Orbis Systems is creating radical changes in how RF testing is performed. This allows engineers to achieve repeatable and consistent results much faster than was previously possible.

Key Takeaways

By emphasizing end-to-end real-world system usability and long-term performance, Orbis Systems stands at the forefront of RF innovation.

What sets us apartincludes:

Reliable RF Shielding Products: Designed with high RF isolation to enable validation and compliance testing with minimal interference.

Automation Integration: Shield boxes seamlessly integrate with automated test environments, enhancing accuracy and throughput.

Modular and Scalable Design: Orbis Systems’ solutions feature modular, scalable architectures that adapt to evolving wireless technologies.

Compact Yet Powerful: Portable shield boxes deliver full RF test performance while conserving valuable lab space.

Prepared for the Future: Orbis empowers engineers to meet next-generation RF standards with solutions compatible with 5G and IoT technologies.

These capabilities position Orbis Systems as a global leader in developing advanced RF test environments.

A Smarter Way to Simplify Industrial Operations

Accurate RF testing plays a critical role in ensuring reliable wireless communication. Every device from smartphones and smart home appliances to 5G base stations and autonomous vehicles requires effective RF shielding to prevent interference and ensure consistent performance. Traditional testing environments often rely on large, complex chambers that are costly and slow to deploy.

Orbis Systems provides a smarter alternative. With its latest RF test and shielded chamber solutions, the company combines engineering precision with operational flexibility. These modular RF shielded box is enable testing of devices from small IoT modules to large systems with exceptional speed and accuracy, delivering repeatable data with minimal setup time and space.

Orbis Systems is a globally recognized leader in RF testing, offering scalable solutions for research labs, production environments, and certification facilities.

The Changing Landscape of RF Testing

RF technology is evolving faster than ever. Emerging 5G, Wi-Fi 7, IoT, and autonomous vehicle applications have significantly increased the demand for fast, precise RF testing. Engineers face challenges due to broader frequency bands, stricter compliance regulations, and shorter product development cycles.

Traditional anechoic chambers work effectively but occupy significant space, are complex to install, and require ongoing maintenance. They are often impractical for small- or medium-scale production testing.

Orbis Systems addresses these limitations with modular, compact test enclosures that provide high RF isolation. By combining the reliability of traditional test chambers with the flexibility of portable enclosures, Orbis enables engineers to replicate real-world RF conditions in isolated, interference-free environments, simplifying multi-band and multi-standard testing.

Orbis Systems’ Advanced Approach to RF Shield Box Design

Orbis Systems differentiates itself by designing shield boxes that combine advanced engineering with high-quality components, achieving shielding performance approaching that of full-size chambers.

High RF Isolation: Each box prevents external interference, ensuring accurate and repeatable measurements.

Flexible Interface Capabilities: Panels can be equipped with RF connectors, AC/DC power, USB, Ethernet, or optical interfaces to connect a wide range of devices.

Multi-standard Support: Wi-Fi, Bluetooth, LTE, and 5G devices can be tested within a single setup, reducing reconfiguration time.

Reliable Performance: Consistent RF isolation is maintained over long-term operation.

The modular design allows use in diverse environments, from R&D labs requiring flexible setups to production lines supporting high-throughput testing. Beyond shielding, Orbis optimizes internal ventilation, thermal management, and cabling to maintain device stability, ensuring that every test is controlled, reproducible, and consistent.

Seamless Integration with Automated Test Systems

In today’s labs and production lines, automation is essential. Orbis Systems’ RF shield boxes seamlessly integrate with automated test systems, enabling engineers to handle devices, collect data, and evaluate performance efficiently.

Automation reduces human error, ensures reproducible results, and shortens the cycle between design and certification. Orbis shield boxes also interface with other systems, allowing remote control of test cycles and consistent testing across multiple global sites.

These capabilities are particularly valuable in RF compliance testing, where accurate, repeatable measurements can accelerate certification and reduce labor requirements.

Portable and Scalable Shield Box Configurations

Modern wireless devices, from sensors and home appliances to IoT modules, can be tested in compact, portable RF enclosures. Orbis Systems meets these needs with multiple portable RF shield box configurations.

These mini enclosures deliver RF isolation and measurement accuracy comparable to full-size systems for specific applications, yet they are easy to deploy, scale, and configure. Engineers can test individual devices or multiple units simultaneously and reconfigure compartments to expand testing capacity without rebuilding the system. Modular design future-proofs the solution for emerging technologies such as 5G, 6G, and satellite-based IoT networks.

Partner with Orbis Systems to Improve Test Throughput

As wireless technology evolves, testing must be accurate, fast, and scalable. Orbis Systems’ modular RF shielded enclosures enable compliance testing in laboratories and production lines with high efficiency and flexibility. These solutions support IoT product testing and automated 5G test deployments, offering reliable performance and adaptable configurations.

Explore Orbis Systems’ latest RF test solutions to expand your testing capabilities for the future of wireless innovation.

Frequently Asked Questions

1. What is the purpose of an RF shielded box?

An RF shielded box blocks external radio interference, ensuring that test results are reproducible and reliable.

2. What role does an RF shielded box play in RF compliance testing?

It provides a controlled, interference-free environment, allowing tests to be repeated consistently to meet regulatory certification standards.

3. Can RF-shielded boxes be used to test 5G and IoT devices?

Yes. Orbis Systems enclosures are designed to support modern wireless technologies such as 5G, Wi-Fi, Bluetooth, and IoT devices.

4. Can small RF shield boxes deliver performance similar to full-size chambers?

For most applications, they provide comparable RF isolation and repeatability while saving space and cost, making them ideal for labs and production facilities.

5. How do Orbis Systems solutions differ from others?

With high isolation, flexible connectivity, and automation integration, engineers can streamline testing while maintaining accuracy and throughput.

Table Of Contents

1. What are Robotic RF Testing Solutions?
2. Robotic-Assisted RF Test Solutions for Automating High Volumes
3. Automated Positioners with Millimetre-Level Precision
4. Positioner Features That Ensure Accurate RF Testing
5. API and System Integration for Accurate RF Testing
6. Automation of safety, tilt simulation, and RF testing
7. Benefits at the System Level for High-Volume RF Test Lines
8. Redefining Efficiency in RF Test Automation
9. Frequently Asked Questions

Robotic RF test solutions accelerate high-volume testing and enhance accuracy and reliability through robotic arm positioners seamlessly integrated with modular RF test systems.

Key Points

• Orbis Systems provides modular test platforms with robotic positioners, OTA chambers, and RF switching for automated RF testing.
• Theta/Phi positioner is a sophisticated system that enables precise coordinate control with minimal reflections.
• REST API integration allows seamless synchronization with RF switching units and test software.
• Built-in safety features and tilt simulation enhance both operator safety and the realism of test scenarios.
• Orbis solutions are applicable across a wide range of environments, from research and development to high-volume production.

What are Robotic RF Testing Solutions?

Robotic RF testing solutions represent a significant advancement in large-scale validation. Traditionally, RF testing required manual repositioning of devices and lengthy setup times. This process slowed production, introduced errors, and made repeatability challenging.

With robotic arm positioners, the operation becomes fully automated. During over-the-air (OTA) testing, devices can be rotated, pitched, and translated with high precision while measurements are captured in real time. The result is reduced cycle times and highly consistent data.

Orbis Systems offers modular test platforms that integrate robotic positioners, RF switching, and OTA chambers into a single workflow. This modularity enables seamless scalability, from early-stage R&D testing to high-volume production, without the need to redesign the test environment.

Robotic-Assisted RF Test Solutions for Automating High Volumes

Testing thousands of units under consistent conditions is essential for mass production. Variations can occur when devices are handled or measured differently. Robotic solutions eliminate these inconsistencies by executing standardized test routines with repeatable precision.

Orbis Systems provides modular platforms that can be adapted to different testing requirements.

• RF Signal Switching Units (SSUs): Route signals across multiple testing paths.
• OTA Chambers: Create controlled environments for accurate wireless performance testing.

Automated Positioners with Millimetre-Level Precision

These systems work together to create a fully automated workflow, minimizing the need for manual operator intervention at each step. This automation accelerates validation, reduces human errors, and improves repeatability. By automating RF component testing, companies can also reduce operational costs and increase overall throughput

Positioner Features That Ensure Accurate RF Testing

The reliability of RF testing largely depends on the consistency of device positioning during measurements. Even slight deviations in angle or orientation can lead to inaccurate results. Orbis addresses this challenge with advanced positioner designs, such as the Theta/Phi positioner.

This positioner enables continuous motion with minimal reflection, even within compact OTA chambers. It supports repeatable test geometries by simulating both horizontal and vertical sweeps, ensuring that all devices are tested under consistent conditions for predictable performance.

Low-reflection operation is a key feature, minimizing the influence of the positioner’s mechanics on measurement accuracy. Orbis positioners are designed to avoid interference with RF signals, providing trustworthy and reproducible test results.

API and System Integration for Accurate RF Testing

Automation is most effective when it integrates seamlessly with existing systems. Orbis systems positioners feature REST API interfaces, enabling full compatibility with test orchestration software.

Through the API, operators can:

• Automatically move positioners.
• Configure RF switch units to synchronize with positioner motion.
• Record measurements automatically, eliminating manual data entry.
• Adjust workflows for different device models.

This integration reduces downtime when introducing new devices and enables continuous or unattended testing, including overnight operation. Orbis ensures its systems provide scalable and flexible automation by simplifying software control.

Automation of safety, tilt simulation, and RF testing

Safety is critical in any automated system. Orbis systems Positioners include built-in safety features to protect operators. For example, multi-DUT systems automatically stop motion if someone enters the chamber, preventing accidents during automated operations.

In addition to safety, Orbis systems positioners offer advanced simulation capabilities. Features such as tilt simulation allow testing under conditions that closely mimic real-world scenarios, providing more accurate production testing and valuable data for product qualification.

These capabilities enable scalable RF test automation without compromising operator safety or test quality.

Benefits at the System Level for High-Volume RF Test Lines

Scalability: The same core system can support research and development, scale up for high-volume production, and be adapted for post-sale testing.

Flexibility: Testers can handle a wide range of devices and product families with minimal reconfiguration.

Efficiency: Automation eliminates manual setup, accelerating each test cycle and reducing operational costs.

These system-level advantages enable manufacturers to continuously capture performance data while transitioning to new technologies and product lines, reducing bottlenecks and accelerating time-to-market for high-volume production.

Redefining Efficiency in RF Test Automation

Robotic arm positioners are transforming high-volume RF test automation. They enable manufacturers to perform large-scale validation faster and more reliably through precise motion, API-enabled integration, and built-in safety features.

Orbis Systems delivers this capability with modular, extensible test platforms. Their solutions integrate positioners, OTA chambers, and RF switching systems into a streamlined workflow suitable for both R&D laboratories and manufacturing environments.

Now is the ideal time to explore Orbis systems solutions to make your RF test lines faster, more accurate, and safer. To learn more, schedule a demo or consult Orbis Systems for a custom robotic RF testing solution tailored to your needs.

Frequently Asked Questions

1. What does a positioner do in RF testing?

A positioner is a device that accurately positions DUTs (Devices Under Test) and antennas to replicate the geometries required for testing. Orbis systems positioners are designed to minimize reflections and ensure precise, reliable measurements.

2. Is it possible to include robotic positioners in software for test automation?

Yes. Orbis Systems positioners can be directly connected to orchestration software and RF switch hardware through their REST API interfaces.

3. Can robotic positioners test more than one device at a time?

Yes. Orbis Systems offers multi-DUT solutions that can test more than one device at a time, which cuts down on the time it takes to run tests.

4. How do robotic positioners make RF testing more accurate?

In OTA chambers, robotic positioners provide smooth, controlled motion, minimize reflections, and ensure repeatable test geometries, resulting in more accurate measurements.

5. How do robotic positioners and switching systems work together?

Orbis Systems integrates positioners with RF switching units and modular racks to enable fully automated test workflows.

Table of Contents

1. RF positioner solutions for 5G labs
2. High-accuracy RF positioning systems for OTA testing
3. Azimuth-centric positioner designs for base-station verification
4. Key Takeaways
5. FAQs

In advanced 5G and OTA testing, device orientation is a critical factor. Even a small misalignment in rotation can cause significant variations in measured throughput, beamforming accuracy, and antenna gain. To address this challenge, Orbis Systems’ Azimuth Positioner Solutions provide precise, automated control that safeguards test integrity and ensures repeatable results.

When paired with the right OTA chamber, a high-precision azimuth positioner directly improves measurement accuracy, shortens test cycles, and delivers reliable outcomes. Orbis Systems designs turnkey OTA environments where 5G positioners integrate seamlessly with RF-shielded chambers, DUT handlers, and control software to create a fully automated and dependable testing setup.

These solutions support both Sub-6 GHz and mmWave frequencies, with absolute-sensor feedback on every axis and REST API control for efficient automation. Such capabilities are especially valuable in 5G FWA (Fixed Wireless Access) deployments, where antenna testing chambers validate performance and help ensure robust, high-quality network coverage before rollout.

Key Takeaways

• Positioner and Chamber Integration: Orbis Systems combines RF-shielded chambers with precision azimuth and elevation positioners to deliver accurate, repeatable measurements across Sub-6 GHz and mm Wave frequencies.
• REST-Based Automation: Absolute sensors on every axis, coupled with Ethernet/REST API control, eliminate the need for manual scales and accelerate automated testing.
• Fast and Accurate Sweeps: Theta/Phi continuous-drive design enables synchronized antenna sampling while minimizing reflection effects for precise OTA measurements.
• Compact Sub-6 GHz Chambers: ±90° rotation, ±30° tilt, and Y/Z positioning provide controlled, RF-safe environments for early RF and software verification.
• FWA Testing: Our OTA chambers play a crucial role in validating 5G FWA antenna performance before field deployment, ensuring reliable network operation.

RF positioner solutions for 5G labs

At Orbis Systems, the positioner is the core of OTA measurement repeatability—not just an accessory. Our 5G OTA chamber combine precision antenna positioning, RF shielding, and customizable DUT interfaces, supporting both Sub-6 GHz (FR1) and mmWave (FR2) frequencies for accurate and controlled testing.

For Sub-6 GHz validation, Orbis offers a sea-container anechoic chamber with automated DUT rotation (±90°) and tilt (±30°). The measurement antenna moves automatically along the Y-axis and manually along the Z-axis, creating a compact free-space environment that isolates the test scene, ensures safe ventilation, and provides AC/DC/RF/data access. This makes it ideal for early RF and software verification.

Key Technical Advantages

• High Accuracy: Rotation precision down to ±0.1° (model-dependent) for trustworthy data.
• Smooth, Stable Motion: Engineered to avoid vibration and reduce artifacts in measurements.
• Payload Flexibility: Scalable platforms support devices from small handsets to large automotive DUTs.
• Long-Term Repeatability: Maintains accuracy over repeated test cycles, essential for extended campaigns.

Why azimuth accuracy in an antenna testing chamber matters

Azimuth accuracy inside an antenna testing chamber is critical because it determines how precisely engineers can measure an antenna’s radiation pattern, gain, and overall performance. Even minor deviations can lead to misleading results, which in turn affect device validation and network reliability.

To address this, Orbis Systems’ Theta/Phi positioner is built for both speed and precision. Its continuous-drive operation with position-synchronized measurement points minimizes stop-and-settle delays, delivering faster sweeps and higher-quality data.

The design also incorporates low-reflection mechanics, with metal parts placed behind the antenna to preserve the integrity of the radiation pattern. This ensures that azimuth sweeps remain accurate, while vertical cuts are handled through software-controlled interpolation, providing precise results without the need for oversized chambers.

High-accuracy RF positioning systems for OTA Testing

Accurate device positioning is one of the most important requirements in over-the-air (OTA) testing. Orbis Systems’ high-precision RF positioning systems provide programmable and repeatable control of both device and antenna orientation. This ensures that every measurement reflects the true performance of the DUT across Sub-6 GHz and mmWave frequencies.

Why High-Accuracy Positioning Matters

• Reliable antenna characterization is achieved by precisely measuring beam patterns, gain, and MIMO behavior.
• Consistent test data is maintained by reducing variability that arises from manual positioning errors.
• Full angular coverage is possible by performing complete azimuth and elevation sweeps for thorough device validation.
• Automation is simplified through seamless integration with REST API, SCPI, and LabVIEW for test sequencing.

Key Advantages of Orbis Systems’ Positioners

• Ultra-fine resolution is delivered with sub-degree rotation for both DUT and probe antennas.
• Multi-axis motion is supported with azimuth, elevation, and tilt adjustments for flexible testing setups.
• Stability is maintained with vibration-free mechanics, ensuring accuracy during continuous measurements.
• Modular and scalable designs allow support for devices ranging from smartphones to large automotive antennas.
• Both production and R&D testing are supported, making the systems suitable for early-stage research as well as high-volume qualifications.

Azimuth-centric positioner designs for base-station verification

Accurate azimuth positioning is critical in verifying base-station performance. Orbis Systems’ azimuth-centric positioner designs provide precise, repeatable rotational control for antennas and devices under test (DUTs), ensuring reliable measurement of beam patterns, gain, and MIMO behavior across Sub-6 GHz and mm Wave frequencies.

Why Azimuth-Centric Positioning Matters

• Beamforming Validation: Capture true directional performance of base-station antennas.
• 360° Coverage: Full azimuth rotation for complete radiation pattern characterization.
• Repeatable Measurements: Automated rotation minimizes human error and improves test consistency.
• Seamless Automation: Integrates with REST API, SCPI, and LabVIEW for controlled, programmable testing.

Conclusion

Orbis systems Azimuth- positioners deliver precise, repeatable, and automated rotation, enabling engineers to obtain accurate, real-world performance data and accelerate both R&D and production verification processes.

Contact Orbis Systems to design an azimuth positioner tailored to your base-station verification needs.

FAQs

1. What is OTA testing in the context of an antenna testing chamber?

OTA (Over-the-Air) testing measures a device’s wireless performance in a controlled environment without using cables. Orbis OTA chambers use RF shielding and absorbers to block external interference, enabling repeatable, accurate measurements of radiated signals, beam patterns, and antenna performance.

2. How do Orbis positioners stay accurate during long azimuth sweeps?

Orbis positioners use absolute encoders on each axis combined with closed-loop feedback control for precise, repeatable motion. The Theta/Phi system supports continuous azimuth/elevation sweeps with synchronized measurement points, ensuring minimal error during long rotations. Positioners can be automated via a REST API, SCPI, or LabVIEW for seamless integration into test workflows.

3. Can a compact antenna testing chamber handle Sub-6 GHz base-station work?

Yes. Orbis’s Sub-6 container chamber supports automated DUT rotation (±90°) and tilt (±30°) with free-space distances that suit early RF and software verification.

4. Do these positioner systems support mmWave verification?

Yes. Orbis offers standard setups for Sub-6 GHz and mmWave OTA chambers with flexible antenna positioning and REST-based automation.

5. Why do FWA programs rely on an antenna testing chamber?

Fixed Wireless Access (FWA) programs depend on OTA chambers to validate beam quality, coverage, and link reliability before deployment. Chambers allow engineers to test 5G FWA devices in a controlled, interference-free environment, ensuring strong, stable connections and optimal real-world performance.

Table of Contents

1. How to Understand Fixed Wireless Access in the 5G Era
2. Why 5G-Based FWA Wireless Is Gaining Popularity
3. Role of Antenna FWA 5G in Performance Delivery
4. Importance of an Antenna Testing Chamber in Network Validation
5. Moving Forward with 5G FWA
6. A list of frequently asked questions (FAQs)

Key points

• The rise of home internet through FWA solutions is a clear sign that people are moving away from traditional broadband. Here are some more in-depth points to remember:
• 5G will change how people use the internet at home. FWA uses 5G technology to deliver high-speed internet comparable to fiber, especially in areas without cable infrastructure
• The way the antenna is made is fundamental. How well antenna FWA 5G setups work determines how well networks can handle a lot of traffic.
• Testing makes sure that everything is working well. An antenna testing chamber lets providers see how well an antenna works.
• Scalability is essential. FWA is a faster, more flexible, and less expensive way to grow than wired broadband.
• Businesses are adopting it more quickly. As operators see the benefits for the economy and performance, FWA is becoming a standard part of next-gen internet strategies.

5G Fixed Wireless Access (FWA) is transforming home and enterprise internet by delivering fiber-like speeds without the need for extensive cabling. This makes FWA a powerful alternative in areas where laying fiber is costly or time-consuming, and it’s one of the reasons why FWA is quickly gaining momentum as a future-ready connectivity solution.

Over the past few years, the global demand for high-speed internet has skyrocketed. The rapid growth of the Internet of Things (IoT), smart home devices, streaming services, and remote work has placed heavy pressure on traditional wired broadband networks.

5G-enabled Fixed Wireless Access offers a fast, reliable, and scalable way to deliver broadband services. Its performance is made possible by innovations in advanced 5G antenna technologies such as beamforming, massive MIMO, and dynamic spectrum utilization, which improve signal reach, speed, and stability.

To ensure that these systems perform consistently in real-world deployments, network equipment and customer-premises devices undergo rigorous evaluation in antenna testing environments, such as anechoic chambers. These controlled environments help validate signal strength, coverage patterns, and device interoperability ultimately ensuring a dependable user experience.

How to Understand Fixed Wireless Access in the 5G Era

Fixed Wireless Access (FWA) uses radio signals from cellular base stations to connect to customer premises equipment (CPE). Unlike fiber or DSL, it doesn’t require extensive long-distance cabling, making it a faster and more cost-effective way to deliver broadband connectivity. Inside the home or office, the CPE then distributes the connection via Wi-Fi or Ethernet to user devices.

FWA is especially valuable in areas where laying fiber is too expensive or physically impractical. With 5G radio access technologies, FWA can deliver high-speed, low-latency internet that enables smooth streaming, remote work, IoT applications, and even bandwidth-hungry services like cloud gaming and VR.

While fiber still provides the highest and most consistent performance, 5G FWA offers gigabit-class speeds under the right conditions, often making it comparable to fiber for many everyday applications.

To close the digital divide, operators worldwide are rapidly rolling out FWA as a scalable, flexible, and cost-efficient part of next-generation connectivity strategies.

Why 5G-Based FWA Wireless Is Gaining Popularity

There are both technical and economic reasons why Fixed Wireless Access (FWA) is becoming a leading connectivity choice. Unlike older 4G-based setups, 5G FWA leverages advanced technologies such as massive MIMO, beamforming, and a mix of sub-6 GHz and mmWave spectrum to deliver reliable high-speed broadband.

Key Benefits of 5G FWA

Scalability

Operators can expand coverage and capacity much faster, since they don’t need to dig trenches or lay long stretches of fiber cable.

Speed

5G FWA delivers hundreds of Mbps to gigabit-class speeds, often comparable to fiber for everyday applications like streaming, remote work, and cloud services.

Cost-Effectiveness

Lower infrastructure costs make it possible to bring high-speed internet to rural and suburban areas where fiber rollout would be too expensive.

Flexibility

FWA allows providers to adapt to changing demand, such as in business districts or tourist areas that see seasonal or peak traffic.

Together, these benefits make 5G FWA not just a short-term solution, but a strategic, long-term option for closing the digital divide and enabling next-generation connectivity worldwide.

Role of Antenna FWA 5G in Performance Delivery

The antenna is one of the most critical components of any Fixed Wireless Access (FWA) setup. In 5G FWA systems, antennas provide the wireless link between the network base station and the customer premises equipment (CPE), ensuring strong, reliable, and high-capacity connections.

Modern antenna technologies such as beam steering and phased array designs allow networks to cover larger areas, improve signal focus, and reduce interference. These innovations are key to delivering the consistent speeds and stability that users expect from 5G FWA.

The design, calibration, and testing of antennas have a direct impact on network performance. Factors such as frequency bands, polarization, and radiation patterns influence signal strength, coverage quality, and interference levels. These, in turn, affect the throughput and user-perceived latency of the connection.

By combining advanced design with rigorous testing, 5G FWA antennas play a central role in achieving dependable, high-speed wireless broadband

Importance of an Antenna Testing Chamber in Network Validation

Antenna testing chambers play a critical role in ensuring that 5G Fixed Wireless Access (FWA) networks deliver reliable and consistent performance. These specialized facilities create a controlled environment where antennas can be evaluated without interference or reflections from the outside world.

In these chambers, antennas are validated against international standards through measurements such as gain, efficiency, directivity, and radiation patterns. This testing provides valuable insight into how antennas perform in real-world conditions, helping engineers fine-tune designs for maximum coverage and stability.

Without careful testing and calibration, 5G FWA networks risk experiencing issues such as inconsistent speeds, reduced coverage, and higher interference levels. By eliminating these risks, antenna testing chambers are not only essential tools for engineers but also fundamental to ensuring dependable connectivity for end users.

Moving forward with 5G FWA

The future of connectivity is becoming increasingly wireless, and Fixed Wireless Access (FWA) powered by 5G is at the forefront of this transformation. By combining advanced antenna technologies with rigorous testing in antenna testing chambers, providers can ensure smooth, reliable, and high-performance experiences for end users.

Orbis Systems plays a vital role in this evolution by delivering state-of-the-art testing environments that help 5G innovators validate, optimize, and accelerate their solutions for real-world deployment.

As global demand for faster and more dependable internet continues to grow, 5G FWA is emerging as a cost-effective, scalable, and future-ready option for both homes and businesses. Now is the time to explore how FWA can transform connectivity and keep you ahead in the digital age.

A list of frequently asked questions (FAQs)

Q1: What is 5G Fixed Wireless Access (FWA)?

5G FWA sends high-speed internet to homes and businesses through wireless signals instead of cables.

Q2: How is FWA different from regular broadband?

FWA can deliver gigabit-class speeds comparable to fiber under the right conditions, but fiber still offers greater consistency and capacity

Q3: Why is it essential to test antennas for 5G FWA?

Testing in antenna chambers ensures antennas meet performance standards across frequency bands, supporting reliable coverage and minimizing interference.

Q4: Can FWA take the place of fiber internet completely?

FWA does not entirely replace fiber but complements it by providing connectivity in areas where fiber is too expensive or time-consuming to deploy.

Q5: What kinds of businesses benefit the most from FWA solutions?

FWA’s ability to grow and stay reliable helps more than just homes. For instance, it helps manufacturing, logistics, and smart cities.

Table of Contents

1. Redefining 5G OTA Testing with Sea-Container Chambers
2. Why Sea-Container Testing Matters in the 5G Era
3. Inside the OTA Performance Test System
4. Antenna Positioning System: Making Accuracy a Reality
5. Driving the Future of Wireless Validation with Orbis Systems
6. Frequently Asked Questions

Key Takeaways

• Global Mobility- The chambers can be transported and deployed worldwide, allowing companies to avoid the expense of permanent labs and begin testing much sooner.
• Integrated OTA Test Systems- Each chamber can be equipped with a fully automated OTA performance test system, ensuring consistent, reproducible, and reliable results.
• Advanced Antenna Positioning- The integrated positioning system enables accurate testing of antenna radiation patterns, beamforming performance, and complex antenna behaviors across both Sub-6 GHz (FR1) and mmWave (FR2) frequency ranges.
• Modular, Customizable Design- The container chambers can be tailored to specific devices, frequency bands, and testing conditions, providing maximum flexibility for evolving test requirements.
• Accelerated Product Development- By enabling advanced testing at multiple global locations, Orbis Systems’ solution helps companies shorten development cycles and reduce delays in bringing new wireless products to market.

Orbis Systems has transformed standard shipping containers into mobile, RF-shielded 5G OTA chambers. Designed for both Sub-6 GHz and mmWave device validation, these modular chambers integrate advanced OTA performance systems with precision antenna positioning and remote automation. The result is laboratory-grade testing accuracy combined with the flexibility to deploy and operate anywhere in the world.

Redefining 5G OTA Testing with Sea-Container Chambers

With the rapid growth of the telecommunications industry, ensuring wireless devices are tested in a consistent and controlled environment has become a top priority. Orbis Systems addresses this challenge by integrating advanced 5G OTA (Over-the-Air) test chambers into standard sea containers.

These mobile chambers are fully RF-shielded, providing a controlled environment that prevents external interference and ensures reliable measurements. Designed for fast deployment in outdoor or remote locations, they enable businesses worldwide to test 5G and IoT devices with speed, accuracy, and flexibility.

Why Sea-Container Testing Matters in the 5G Era

Manufacturers, research centers, and network operators face growing pressure to deliver new devices and accelerate 5G rollouts. Traditional OTA test labs, while essential, are expensive and time-intensive to build. Orbis Systems addresses this challenge with sea-container-based testing chambers that provide a portable and rapidly deployable alternative.

Designed for fast setup, these chambers allow organizations to expand test capacity or relocate facilities without starting from scratch. This flexibility enables next-generation devices—from smartphones to automotive systems—to be tested closer to manufacturing sites or R&D hubs, reducing both cost and time to market.

Inside the OTA Performance Test System

Each chamber can be equipped with a complete OTA (Over-the-Air) performance test system. This setup includes an RF-shielded enclosure, high-precision measurement antennas, device holders with positioning capabilities, and a software control platform. By automating test procedures, the system minimizes human intervention and ensures consistent, repeatable, and reliable results.

One of the advanced features of these chambers is the use of Planar Wave Synthesis (PWS). PWS enables the system to create a controlled electromagnetic environment that simulates far-field conditions within a compact test space. This is particularly valuable for 5G, where accurate emulation of real-world signal propagation and beamforming behavior is critical.

A key advantage of the solution is the built-in REST API interface, which allows engineers to control and monitor tests remotely. Whether evaluating signal strength, throughput, or latency, the chambers, powered by automated testing and PWS, deliver precise performance insights that closely reflect real 5G network conditions.

Antenna Positioning System: Making Accuracy a Reality

A standout feature of Orbis Systems’ sea-container chambers is the advanced antenna positioning system, a true 3-axis motion controller. It precisely controls measurement antenna height, radial distance, and polarization/rotation, providing exceptional alignment for antennas and devices under test. Each axis integrates absolute position sensors, ensuring the system retains its alignment even after power interruptions. This eliminates the need for recalibration and saves valuable testing time.

The system also offers real-time position monitoring and control via Ethernet, leveraging a standard REST API interface for seamless automation and test integration. In the demanding scenarios of 5G and mmWave testing, where even minimal angular deviations can skew results, this level of precision and reliability is indispensable.

Driving the Future of Wireless Validation with Orbis Systems

Orbis Systems is redefining wireless testing by combining innovation, mobility, and precision in its sea-container-based 5G OTA chambers. Equipped with integrated OTA performance test systems and advanced antenna positioning, these chambers deliver the essential capabilities companies need to validate modern wireless devices quickly, accurately, and reliably.

Whether for 5G, IoT, or other next-generation technologies, Orbis Systems provides a faster, smarter, and more flexible approach to device testing. Partner with Orbis Systems to accelerate your product development and bring high-performance wireless solutions to market with confidence.

Frequently Asked Questions

1. What is a sea-container-based OTA chamber, and how does it differ from a traditional OTA lab?

A sea-container-based OTA chamber is a fully RF-shielded test environment engineered within a standard shipping container. Unlike fixed OTA labs, these chambers are mobile, modular, and globally deployable. They offer the same laboratory-grade testing conditions but with faster deployment, lower upfront costs, and the flexibility to scale or relocate testing capacity as needed.

2. In what ways does an OTA performance test system enhance 5G device testing?

An OTA (Over-the-Air) performance test system enables engineers to evaluate how devices behave in wireless conditions without using physical cables. For 5G, this includes assessing beamforming, signal coverage, data rates, and latency within controlled environments that replicate real-world network conditions. Integrated automation ensures reproducible, accurate, and efficient test results.

3. An antenna positioning system is crucial in OTA testing. Why?

The antenna positioning system allows the device under test to be rotated and aligned in any direction. This is critical in 5G testing—especially at mmWave frequencies—where signal performance is highly sensitive to angle and orientation. Without precise alignment, measurements can yield inaccurate results that do not represent real-world device behavior.

4. Are these rooms capable of hosting other types of testing besides 5G?

Yes. The chambers are flexible and support Sub-6 GHz and mmWave testing, automotive, and IoT use cases. This positions them as a future-proofed investment choice for businesses that play across several wireless technologies.

5. What are the strengths of sea-container chambers compared to fixed OTA labs?

Conventional OTA labs involve permanent infrastructure, high costs, and lengthy construction times. In contrast, sea-container chambers are more economical, quicker to deploy, and can be relocated as needed. For companies expanding internationally or requiring temporary or distributed test capacity, these mobile chambers provide a more versatile and scalable alternative.

Table of Contents

1. Understanding RAN Interference in the 5G Era
2. A Deep Dive into Interference and RAN Analysis
3. What Orbis Systems Offers to Ensure Accurate Control and Testing
4. Advanced test considerations and technical terms
5. Driving Reliable 5G Performance with RAN Interference Analysis
6. Questions and Answers

Find out how RAN interference analysis gives you a more profound understanding of the 5G Radio Access Network performance and why this is important to advanced OTA testing and precise control.

Key Points

• Without practical RAN interference analysis, networks face higher risks of dropped connections, reduced throughput, and unstable user experiences.
• Orbis Systems’ antenna positioning system enables exact control of height, distance, and polarization, ensuring repeatable and precise test conditions.
• REST API support and real-time monitoring simplify test execution, making interference detection and analysis faster and more reliable.
• Absolute position sensors maintain alignment even after power loss, providing confidence in long test cycles and repeated measurements.
• OTA chambers and calibration tools allow engineers to recreate interference conditions in the lab, helping identify, validate, and mitigate network issues before deployment.

Understanding RAN Interference in the 5G Era

Advanced RAN interference analysis is a critical component of Radio Access Network optimization, helping engineers understand how signals interact and affect performance in 5G deployments. You will learn how interference degrades performance and how controlled testing environments can help identify and mitigate these issues before live deployment

A Deep Dive into Interference and RAN Analysis

In contemporary cellular networks, interference between adjacent cells, out-of-sync timing, or improperly configured neighbor relationships can all significantly degrade throughput, reliability, and user experience. The 5G RAN environment is especially complex in Time Division Duplex (TDD) systems, where uplink and downlink share the same frequency band and depend on precise time-slot separation.

This makes proper synchronization and interference reduction techniques essential. Interference analysis is critical for detecting uplink timeslot issues and maintaining frame alignment, particularly in dense network deployments

What Orbis Systems Offers to Ensure Accurate Control and Testing

Orbis Systems leads the way in providing 5G OTA testing solutions that allow interference to be tested accurately in controlled environments. Their 5G antenna positioning solution uses absolute position sensors to keep antennas precisely aligned even after a power loss. Engineers can adjust height, distance, and polarisation in real time, enabling repeatable interference scenarios across multiple test conditions.

This level of precision is critical not only for standard testing but also for automated testing in modern telecom networks, enabling teams to systematically identify, validate, and mitigate interference before deployment

Advanced test considerations and technical terms

In radio testing, terms such as OTA (Over-The-Air), DUT (Device Under Test), and REST API integration are essential for enabling automated and repeatable test processes. Orbis Systems provides a complete solution that encompasses OTA chambers, DUT and antenna positioning, and calibration for accurate signal analysis.

The system’s ability to maintain antenna positions even after a power loss demonstrates its reliability during extended interference testing and analysis.

Driving Reliable 5G Performance with RAN Interference Analysis

Suffice it to say that knowing RAN interference analysis in the case of a 5G Radio Access Network is essential to making sure the network operates at its best and users are satisfied. Interference issues can be identified and resolved beforehand by engineers with the assistance of sophisticated OTA testing tools such as those offered by Orbis Systems.

These tools provide engineers with the precision and reproducibility they require. Get in touch with Orbis Systems to learn more about their OTA chambers and antenna positioners solutions. These will make your network more reliable today. Improve your RAN performance with precision, automated testing, and robust interference analysis

Questions and Answers

Q1: What is RAN interference analysis?

RAN interference analysis is the process of detecting, measuring, and evaluating unwanted radio signals that overlap or disrupt communication within a Radio Access Network (RAN). In 4G and 5G systems, interference can come from sources such as co-channel interference, adjacent channel leakage, timing misalignment (especially in TDD networks), or external signals.

By analyzing these interference patterns, engineers can identify performance issues like low SINR, reduced throughput, dropped calls, and poor coverage, and then apply mitigation techniques such as power control, beamforming, interference coordination, or advanced scheduling.

Q2: Why is frame synchronisation critical in 5G RAN testing?

Frame synchronization in 5G RAN testing is critical to avoid uplink/downlink conflicts, reduce interference, and ensure accurate performance measurements. Without it, both real-world networks and lab test environments would suffer from unstable and misleading results.

Q3: What are the building blocks needed for an OTA testing solution?

An OTA setup usually includes a chamber that protects RF signals, an antenna and DUT positioners, calibration equipment, and control interfaces like REST APIs through which you can make test scripts automated.

Q4: How does the antenna positioning system of Orbis Systems assist in interference testing?

The system provides precise control over three parameters, such as height, distance, and polarization and uses absolute position sensors to maintain alignment even after a power loss. This ensures repeatable and consistent measurements, which are essential for reliable interference analysis.