Menu Close

Shop

TTK Series 10-120KVA

FEATURES

  • High efficiency, up to 96%
  • Battery cold start
  • High input PF>0.99;Input current THDi <3%
  • Battery management with smart charging control, greatly extend the battery life
  •  Muti-protection, over-temperature protection with 8 sensors, over-load, battery under voltage, fan failures, short-circuit
  • Parallel up to 8 units
  • Four circuit breakers, providing full protection when fault
  • Friendly operation interface, high-resolution LCD screen happens
Enquiry Now
Category:

TECHNICAL SPECIFICATIONS

.

MODEL TTK10К TTK20K TTK30K TTK40K TTK60K TTK80K TTK100K TTK12OK
INPUT
Rated AC Voltage 380/400/415V(L-L)
Type of Input Power 50/50Hz(+5Hz)
Power factor >0.82( >0.92, with fiter) >0.85(>0.94,with fiter)
Harmonic distortion (THDI) <20%(<8%,,with fiter)
Voltage Range 285~500Vac
Frequency range 45~66Hz
Power Stepping Time 5-300 seconds,(settable)
BYPASS
Rated voltage 380/400/415V(L-L)
Voltage Range +20%,-40%, (settable)
Type of Input Power 3 Phase+Neutral+РE
Frequency range 50/60Hz±10%(settable)
Transient Overload 15In, 10ms; 5In, 5s
DC Bus Battery
Battery voltage 384Vdc(default 32, 30-34, settable)
Ripple voltage Superimposed
Charge current Max. 9.1A 18.2A 27.3A 36.4A 54.6A 72.8A 91A 109A
Output
Nominal power 10kVA 20KVA 30KVA 40KVA 60KVA 80KVA 100KVA 120KVA
Active power 8kW 16kW 24kW 32kW 48kW 64kW 80kW 96kW
Rated Voltage 380/400/415V(L-L)
Frequency range Sync.,the same as the bypass input, 50/60±3Hz(settable)
Free running, 50/60(1±0.05%)Hz
Type of Input Power 3 Phase+Neutral+PРE
Votage regulation ±0.5%
Harmonic distortion (with linear load) THD<1.5%(phase voltage) THD<1.5% (phase voltage)
Harmonic distortion (with non linear load) THD<12%(phase voltage) THD<8%(phase voltage)
Frequency stability on battery ±0.05%Hz
Inverter Overload 100%~105%, long; 105%~110%, 60min; 110%~125% 10min; 125%~150% 1min
Bypass<->inverter transfer time Oms,with sync.,<15ms without sync.
Normal<->Battery mode transfer time Oms
Crest factor 3:01
Efficiency 91.00%
Other
Parallel up to 6 units, redundant (optional)
Ioop current 4%(1+1)
5%(1+N)
Noise level at 1 m ≤65DB
Noise level at 1 m ≤65DB
Display 4 line, LCD+LED/touch screen(optional)
Communications RS232+RS485, 8 dry contact signals, SNMP card(optional)
Protection input under/over voltage, over temperature, over current, over load, DC bus over voltage
Cold start standard
Battery temperature compensation optional
Moving the UPS wheel forklift
Operating temperature 0~40°C
Storage/Transport Temperature -25~75°C
Altitude ≥ 1000m a.s.l. de-rate power by 1% per 100m between 1000 and 2000 m
IP rating IP20/IP21
Standards Safety: IEC60950-1, IEC62040-1-1, UL1778, EMC: IEC62040-2 CLASS C2, EN50091-2 CLASS A,
H (mm) 1100 1400 1600
W (mm) 430 720 880
D (mm) 830 690 760
    • All specifications are subject to change without prior notice.
    • Custom-made specifications are acceptable.

Description

Application:
Computer/critical servers/datacenter/hub & other network device/LAN/WAN.

Reviews

There are no reviews yet.

Be the first to review “TTK Series 10-120KVA”

Your email address will not be published. Required fields are marked *